19. Install the secondary memory.
20. Install the primary M.2 SSD.
21. Install the battery.
22. Install the base cover.
23. Install the secondary M.2 SSD.
24. Install the SD card.
25. Follow the procedure in after working inside your computer.
Display back cover
Replacing the display back cover
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD card.
3. Remove the secondary M.2 SSD.
4. Remove the base cover.
5. Remove the battery.
6. Remove the SIM card.
7. Remove the secondary memory.
8. Remove the WLAN card.
9. Remove the WWAN card.
10. Remove the primary M.2 SSD.
11. Remove the keyboard lattice.
12. Remove the keyboard.
13. Remove the SD card reader.
14. Remove the GPU power cable.
15. Remove the GPU card.
16. Remove the primary memory.
17. Remove the heat-sink assembly.
18. Remove the inner frame.
19. Remove the system board.
20. Remove the speakers.
21. Remove the middlecap.
22. Remove the display assembly.
23. Remove the display bezel.
24. Remove the display panel.
25. Remove the P-sensor.
26. Remove the display hinge.
27. Remove the camera shutter cap.
28. Remove the camera.
29. Remove the display cable.
About this task
The picture below shows the display back cover after performing the pre-removal parts procedures for any display back cover
replacement.
Removing and installing components
115