Next steps
1. Install the display assembly.
2. Install the middlecap.
3. Install the speakers.
4. Install the power-adapter port.
5. Install the system board.
6. Install the inner frame.
7. Install the heat-sink assembly.
8. Install the GPU card.
9. Install the GPU power cable.
10. Install the SD card reader.
11. Install the power button or power button assembly with fingerprint reader.
12. Install the touchpad button.
13. Install the power button board or power button board assembly with fingerprint reader.
14. Install the smart card reader.
15. Install the keyboard.
16. Install the keyboard lattice.
17. Install the SIM card.
18. Install the primary memory.
19. Install the WWAN card.
20. Install the WLAN card.
21. Install the secondary memory.
22. Install the primary M.2 SSD.
23. Install the battery.
24. Install the base cover.
25. Install the secondary M.2 SSD.
26. Install the SD card.
27. Follow the procedure in after working inside your computer.
92
Removing and installing components
To Next Page
Loading...
