Dell Precision 7920 Tower - Page 107

Option Description
• 4
• 5
• 6
• 7
• 8
NOTE:
• The options displayed could be different depending
on the installed processor(s).
• The options depend on the number of cores
supported by the installed processor (All, 1, 2, N-1 for
N-Core Processors)
Intel SpeedStep Allows you to enable or disable the Intel SpeedStep feature.
Default Setting: Enable Intel SpeedStep
C States Allows you to enable or disable the additional processor sleep
states.
Default Setting: Enabled
Intel TurboBoost Allows you to enable or disable the Intel TurboBoost mode of the
processor.
Default Setting: Enable Intel TurboBoost
Hyper-Thread Control Allows you to enable or disable the HyperThreading in the
processor.
Default Setting: Enabled
Cache Prefetch
Default Setting: Enable Hardware Prefetch and Adjacent
Cache Line Prefetch
Dell Reliable Memory Technology (RMT) Allows you to identify and isolate memory errors in system RAM..
Default Setting: Enable Dell Reliable Memory Technology
(RMT)
System Isochronous Mode
Allows you to enable or disable this mode to reduce latency of
memory transactions at the expense of bandwidth. :
Click one of the options:
• Disabled(Default)
• Enabled
RAS Support
Allows you to report or log errors caused by memory failures, the
PCIe failures, CPU failures. The options are:
• Enable on Memory modules
• Enable on PCIe modules
• Enable on CPU modules
The options are not set by default.
System Setup 107