Dell Precision 7920 Tower - Removing the Input and Output Panel Bracket

g) side cover
6. Follow the procedure in After working inside your computer
Removing the input and output panel bracket
1. Follow the procedure in Before working inside your computer.
2. Remove the following:
a) side cover
b) air shroud
c) front bezel
d) PCIe holder
e) front system fan
f) HDD and ODD bezel
g) input and output bezel
h) input and output panel
3. To remove the Input/Output (I/O) panel bracket:
a) Remove the two screws that secure the I/O panel to the bracket.
b) Release and remove the I/O panel out of the bracket.
Removing and installing components
49