Dell Precision 7920 Tower - Fan Bracket; Removing the Fan from the Fan Bracket

NOTE: When HDD# FAN is installed, the HDD fans can be verified in the system setup and individually activated. But
when the HDD# FAN is removed, it needs to manually unchecked in the system setup.
Verify system fan functionality
Onsite Technicians are encouraged to run ePSA after the service is completed to verify if all the fans are detected and working.
Fan bracket
Removing the fan from the fan bracket
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a) side cover
b) system fan
3. To remove the fan from the fan bracket:
a) Slide out the four rubber grommets for each fan from the fan chassis [1].
b) Lift the fan and remove it from the fan assembly [2].
Removing and installing components
69