Installing the air shroud fan
1. Place the fan into its position inside the air shroud .
2. Replace the screws that secure the fan to the air shroud.
3. Route back the fan connector cable through the latches on the air shroud and flip over.
4. Install the:
a) air shroud (top)
b) side cover
5. Follow the procedure in After working inside your computer.
Front bezel
Removing the front bezel
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
3. To remove the front bezel:
a) Press the latch and pry the retention tabs to release the front bezel from the system.
22
Removing and installing components
To Next Page
Loading...
