Dell Precision 7920 Tower - RAID Controller Battery; Removing the RAID Controller Battery

h) front bezel
i) side cover
5. Flip the system to connect the SATA 0 cable to the connector on the system board.
6. Install the right side cover
7. Follow the procedure in After working inside your computer
RAID controller battery
Removing the RAID controller battery
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
3. To remove the RAID controller battery:
a) Disconnect the RAID controller battery cable from the RAID controller card.
b) Push the securing tab out to release the RAID controller battery.
Removing and installing components
85