Dell Precision M6400 - Page 20

Base Assembly: Dell Precision M6400 Service Manual
file:///T|/htdocs/systems/wsm6400/en/sm/base.htm[11/16/2012 10:26:22 AM]
12. Replace the optical drive (see Replacing the Optical Drive).
13. Replace the primary hard drive (see Replacing the Primary Hard Drive (HDD1)
) and the secondary hard drive (see
Replacing the Secondary Hard Drive (HDD2)
).
14. Replace the base assembly cover (see Replacing the Base Assembly Cover
).
15. Follow the procedures in After Working on Your Computer
.
NOTE: If you use a BIOS update program disc to flash the BIOS, press <F12> before inserting the disc in order to set
the computer to boot from the disc for one time only. Otherwise, you must enter the system setup program to change
the default boot order.
16. Flash update the BIOS (see Flashing the BIOS
for more information).
17. Enter the system setup program to update the BIOS on the new system board with the computer Service Tag. For
information on the system setup program, see the Dell™ Technology Guide at support.dell.com.
Back to Contents Page