56 Using Your Projector
RGB COLOR ADJUST—Allows you to manually adjust the colors red, green,
and blue.
SATURATION—Allows you to adjust the video source from black and white
to fully saturated color. Press to increase the amount of color in the
image and to decrease the amount of color in the image.
SHARPNESS—Press to increase the sharpness and to decrease the
sharpness.
TINT—Press to increase the amount of green in the image and to
decrease the amount of green in the image (available for NTSC only).
WHITE INTENSITY—Press and use and to display white intensity.
COLOR SPACE—Allows you to select the color space. The options are: RGB,
YCbCr, and YPbPr.
VGA OUTPUT—Select On or Off the VGA output function at projector
standby status. Default is Off.
NOTE: Saturation, Sharpness, and Tint are only available when the input
source is from Composite or S-Video.
IMAGE SETTINGS (NO INPUT SOURCE)—Select and press to activate image
settings. The image settings menu provides the following options:
VGA OUTPUT—Select On or Off the VGA output function at projector
standby status. Default is Off.
http://www.pureglare.com.au
To Next Page
Loading...
