Dell S500 - Setup and Security Features

Using Your Projector 95
Projection Setup
Projection Setup
• Resolution: Allows you to select the resolution. Options are: XGA
(1024 x 768) and WXGA (1280 x 800).
• Login Code: Select how you want the login code to be generated by the
projector. There are three options:
• Disable: Login code will not be required when logging in to the system.
• Random: Default is Random. Login code will be randomly generated.
• Use the following code: Enter a 4-digit code. This code will be used to
log in to the system.
Projector Setup
•Set up the Model Name, Projector Name, Location, and Contact
information (up to 21 characters for each field).
Click the Apply button to save and apply changes. The projector must be restarted
for the changes to take effect.
http://www.pureglare.com.au