Dell SonicWALL Directory Services Connector 3.7
Administration Guide
14
SonicWALL appliance/firmware compatibility
SonicWALL Directory Services Connector is a supported release for use with the following SonicWALL platforms:
• SuperMassive 9200 / 9400 / 9600 running SonicOS 6.1 and above
• SuperMassive E10200 / E10400 / E10800 running SonicOS 6.0.x
• NSA 2600 / 3600 / 4600 / 5600 / 6600 running SonicOS 6.1 and above
• NSA E-Class E5500 / E6500 / E7500 / E8500 / E8510 running SonicOS 5.0 and above
• NSA 240 / 2400 / 3500 / 4500 / 5000 running SonicOS 5.0 and above
• NSA 220 / 220W / 250M / 250MW running SonicOS 5.8.1 and above
• TZ 215 / 215W / 205 / 205W / 105 / 105W running SonicOS 5.8.1 and above
• TZ 210 / 210W / 200 / 200W / 100 / 100W running SonicOS 5.0 and above
• TZ 190 / 190W / 180 / 180W running SonicOS 4.0 and above
• PRO 2040 / 3060 / 4060 / 4100 / 5060 running SonicOS 4.0 and above
Virtual environment compatibility
Recommended Virtual Environments for Directory Services Connector include:
• VMware ESX 5.5
• VMware ESX 5.1
• VMware ESX 4.x
• Microsoft Hyper-V 2012 R2
• Microsoft Hyper-V 2008 R2
Virtual Machine host configuration requirements:
• OS — Windows Server 2008/2012 R2 32-bit/64-bit
• CPU — Intel Xenon (4 processors)
• Memory — 4GB
eDirectory server compatibility
SonicWALL Directory Services Connector is supported for use with the following eDirectory Servers
• Novell eDirectory 8.8.5
• Novell eDirectory 8.8.7
NOTE: SonicOS 5.5 or newer is required for Novell eDirectory Support.
NOTE: SSO Agent performance is sensitive to the round trip network time during frequent information
exchanges with the network security appliance. The agent machine should be as close as possible to the
appliance for a recommended round trip time of less than 1ms.
To Next Page
Loading...
