Dell U3425WE - Page 17

About your monitor  │  17
7 Thunderbolt™ 4
downstream port (15 W)
f
or daisy chaining (Video
+ Data)
Connect the Thunderbolt™ 4 passive cable
that came with your monitor to the second
monitor or other Thunderbolt™ devices.
This downstream port supports USB Power
De
livery (up to 15 W, PD 5 V/3 A) and is only
suit
able for video output using TBT daisy
chain. For more information, refer to the
instructions in Connecting the monitor for
Thunderbolt™ daisy chain function.
NOTE: Thun
derbolt™ 4 is not supported on
versions of Windows prior to Windows 10.
8 Thunderbolt™ 4
upstr
eam port (Video +
Data). Alternate mode
with DisplayPort 1.4,
Power Delivery up to
90 W
Connect the Thunderbolt™ 4 passive cable
tha
t came with your monitor to the computer
or mobile device. This port supports USB
Power Delivery (up to 90 W), Data, and
Disp
layPort video signal.
This port supports Alternate Mode DP1.4
with
a maximum resolution of 3440 x 1440 at
120 Hz, PD 20 V/4.5 A, 15 V/3 A, 9 V/3 A,
an
d 5 V/3 A.
U3425WE supports daisy chain through
Thunde
rbolt™ 4. To set up daisy-chain
connection, refer to the instructions in
Connecting the monitor for Thunderbolt™
daisy chain function.
NOTE: Thunde
rbolt™ 4 is not supported on
versions of Windows prior to Windows 10.
9 USB Type-C upstream
po
rt (super speed USB
10 Gbps, USB 3.2 Gen2)
(d
ata only)
Connect the USB Type-A to USB Type-C
Gen2 cable that came with your monitor to
the computer. This port supports USB data
transfer at 10 Gbps (USB 3.2 Gen2). Once
this cab
le is connected, you can use the USB
connectors on the monitor.