Operating the monitor │ 73
USB-C
Prioritization
Allows you to specify the priority to transfer the data
with high resolution (High Resolution) or high speed
(High Data Speed) when using the USB Type-C
devices. If the current platform is DP 1.4 (HBR3), use
High Da
ta Speed to access full video performance
with
high data speed. If the current platform is DP 1.2
(HBR2) or below, select High R
esolution for
accessing full video performance with data and network
speed drop.
Thunderbolt
Daisy Chain
The default setting is Standard. When you select
Optimized, this function supports the optimal
bandwidth allocation and configures the settings of
resolution and refresh rate between the monitors in a
daisy chain using the Thunderbolt™ 4 cables.
Dell Power
But
ton Sync
Allows you to control PC system power state from the
monitor power button.
NOTE: W
hen Off is selected, the Wake-on-Connect
function remains active. When USB-C/Thunderbolt
connection is detected, the computer will be turned on.
NOTE: This func
tion is only supported with Dell
platform which has built-in DPBS function, and is only
supported over Thunderbolt interface.
Reset Display Resets all display settings to the factory preset values.
To Next Page
Loading...
