Dell U3425WE - Page 76

76  │  Operating the monitor
Contrast (Sub) Adjusts the contrast level of the picture in PIP/PBP
mode. Move the joystick to adjust the contrast level
from '0' to '100'.
NOTE: The func
tion is available only when the PIP/
PBP mode is enabled.
Screen
P
artition (DP/
TBT)
Select
50% - 50% to split the display into two
virtual displays.
NOTE: Th
e function is available only when using DP or
Thunderbolt input source.
USB
DP assign to Allows you to assign the USB upstream ports for the
input signals (DP and HDMI), thus the monitor's USB
downstream port (e.g. keyboard and mouse) can be
used by the current input signals when you connect a
computer to either one of the upstream ports. See also
Setting the KVM switch for details.
Press the joystick to confirm the selection.
When you use only one upstream port, the connected
upstr
eam port is active.
NOTE: T
o prevent data damage or loss, before
unplugging the USB upstream port, make sure that NO
USB storage devices are in use by the computer
connected to the monitor’s USB downstream port.
HDMI assign to