3. Remove the battery.
4. Remove the heat sink.
5. Remove the GPU fan.
6. Remove the power-button board.
About this task
The following image indicates the location of the power-button with optional fingerprint reader and provides a visual
representation of the removal procedure.
Steps
1. Remove the screw (M2x4) that secures the power-button with optional fingerprint reader to the palm-rest and keyboard
assembly.
2. Lift the power-button with optional fingerprint reader off the palm-rest and keyboard assembly.
Installing the power-button with optional fingerprint reader
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image indicates the location of the power-button with optional fingerprint reader and provides a visual
representation of the installation procedure.
52
Removing and installing components
To Next Page
Loading...
