Table 4. System setup options—Boot Configuration menu (continued)
Boot options
Custom Mode Key Management
Default: PK.
Advanced Boot Options
Enable UEFI Network Stack Enables or disables UEFI Network Stack.
Default: PK
Table 5. System setup options—Integrated Devices menu
System Configuration
HDD Fans Configures which HDD fans are populated in the sytem.
Date/Time
Date Sets the computer date in MM/DD/YYYY format. Changes to the date take
effect immediately.
Time Sets the computer time in HH/MM/SS 24-hour format. You can switch
between 12-hour and 24-hour clock. Changes to the time take effect
immediately.
Camera Enables or disables the camera
Enable Camera
Default: ON.
Enable Audio Enables or disables all integrated audio controller.
Default: ON.
Enable Microphone Enables or disables microphone.
Default: ON.
Enable Internal Speaker Enables or disables internal speaker.
Default: ON.
USB/Thunderbolt Configuration
Enable External USB Ports Enables or disables USB ports to be functional in an operating system
environment.
Default: ON.
Enable USB Boot Support Enables or disables booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
Default: ON.
Enable Thunderbolt Boot Support Enables or disables the Thunderbolt features during preboot.
Default: OFF.
Enable Thunderbolt (and PCIE behind
TBT) pre-boot modules
Enables or disables the PCIE devices connected through a Thunderbolt adapter
to execute the PCIe device's UEFI option ROM(s) present during preboot.
Default: OFF.
Video/Power only on Type-C Ports Limits Type-C port functionality to video or power only.
Default: OFF.
SATA Operation Configures operating mode of the integrated SATA hard drive controller.
Default: RAID. SATA is configured to support RAID (Intel Rapid Restore
Technology).
Drives Enables or disables various onboard drives.
System setup 69
To Next Page
Loading...
