Next steps
1. Install the battery.
2. Install the base cover.
3. Install the SD card.
4. Follow the procedure in After working inside your computer.
System board
Removing the system board
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the M.2 2230 solid-state drive.
6. Remove the M.2 2280 solid-state drive.
7. Remove the memory modules.
8. Remove the fan.
9. Remove the heat sink.
10. Remove the wireless card.
11. Remove the display assembly.
About this task
The following images indicate the location of the system board and provides a visual representation of the removal procedure.
60
Disassembly and reassembly
To Next Page
Loading...
