f. Keyboard Flexible Printed cable
g. Power adapter port cable
h. display cable
4. Remove the three (M2x3) screws that secures the system board to the palmrest.
5. Remove the single (M2x2) screw that secure the system board to the palmrest.
6. Carefully lift the system board away from the chassis.
Installing the system board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the system board and provides a visual representation of the installation procedure.
72 Removing and installing components
To Next Page
Loading...
