Dell Vostro 5390 - Coin-Cell Battery; Removing the Coin-Cell Battery; Installing the Coin-Cell Battery

Coin-cell battery
Removing the coin-cell battery
1. Follow the procedure in Before working inside your computer.
CAUTION: Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is
recommended that you note the BIOS setup program’s settings before removing the coin-cell battery.
2. Remove the base cover.
3. Remove the battery.
The following image indicates the location of the coin-cell battery and provides a visual representation of the removal procedure.
1. Disconnect the coin-cell battery cable from the system board.
2. Remove the coin-cell battery cable from the routing guide.
3. Peel the coin-cell battery off the palm-rest and keyboard assembly.
Installing the coin-cell battery
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the location of the coin-cell battery and provides a visual representation of the installation
procedure.
Removing and installing components
15