Installing the palm-rest and keyboard assembly
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the palm-rest and keyboard assembly and provides a visual representation of the installation
procedure.
Place the palm-rest and keyboard assembly on a flat surface.
1. Install the touchpad.
2. Install the power-adapter port.
3. Install the power button with fingerprint reader or power-button board, whichever applicable.
4. Install the display assembly.
5. Install the system board.
6. Install the speakers.
7. Install the WLAN card.
8. Install the battery.
9. Install the base cover.
10. Follow the procedure in After working inside your computer.
Removing and installing components
37
To Next Page
Loading...
