6. Install the base cover.
7. Follow the procedure in After working inside your computer.
Display back-cover
Removing the display back-cover
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the WLAN card.
5. Remove the display assembly.
6. Remove the display bezel.
7. Remove the display hinges.
8. Remove thedisplay panel.
9. Remove the display cable.
10. Remove the camera.
The following image indicates the display back-cover and provides a visual representation of the removal procedure.
After performing all the prerequisites, we are left with the display back-cover.
Installing the display back-cover
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the display back-cover and provides a visual representation of the installation procedure.
Place the display back-cover on a flat surface.
1. Install the camera.
2. Install the display cable.
3. Install the display panel.
4. Install the display hinges.
5. Install the display bezel.
6. Install the display assembly.
7. Install the WLAN card.
8. Install the battery.
9. Install the base cover.
10. Follow the procedure in After working inside your computer.
Display cable
Removing the display cable
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the display assembly.
5. Remove the display panel.
6. Remove the display bezel.
The following image indicates the location of display cable and provides a visual representation of the removal procedure.
1. Peel off the tape securing the display cable to the back-cover.
2. Peel the display cable off the display back-cover.
Removing and installing components
35
To Next Page
Loading...
