Dell Vostro 5501 - System Board; Removing the System Board

9. Place the mylar cover back.
Next steps
1. Install the system fan.
2. Install the battery.
3. Install the base cover.
4. Follow the procedure in after working inside your computer.
System board
Removing the system board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the SSD-1 (M.2 2280 or M.2 2230).
5. Remove the SSD-2.
6. Remove the WLAN card.
7. Remove the system fan.
8. Remove the heat sink.
9. Remove the memory module.
10. Remove the display assembly.
About this task
The figure indicates the location of the system board and provides a visual representation of the removal procedure.
42
Disassembly and reassembly