Steps
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
1. Install the system board.
2. Install the touchpad.
3. Install the DC-in port.
4. Install the power button with fingerprint reader.
5. Install the I/O board.
6. Install the display assembly.
7. Install the speakers.
8. Install the heat sink.
9. Install the system fan.
10. Install the SSD-1 ( M.2 2280 or M.2 2230).
11. Install the SSD-2 card.
12. Install the memory modules.
13. Install the coin-cell battery.
14. Install the WLAN card.
15. Install the battery.
16. Install the base cover.
17. Follow the procedure in after working inside your computer.
60
Disassembly and reassembly
To Next Page
Loading...
