Coin-Cell Battery
Removing The Coin-Cell Battery
1. Follow the procedures in Before Working on Your Computer.
2. Remove the Secure Digital (SD) card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the card-reader board.
6. Disconnect the coin-cell battery cable from the system board.
7. Release and remove the coin-cell battery from the computer.
NOTE: To replace the coin-cell battery, see Installing The Coin-Cell Battery.
Installing The Coin-Cell Battery
NOTE: To remove or locate the coin-cell battery, see Removing The Coin-Cell Battery .
1. Place the coin-cell battery in its location.
17
To Next Page
Loading...
