Installing The Wireless Wide Area Network (WWAN) Card
NOTE: To remove or locate the WWAN card, see Removing The Wireless Wide Area Network (WWAN) Card.
1. Insert the WWAN card into its connector at a 45–degree angle.
2. Replace and tighten the screw that secures the WWAN card to the computer.
3. Connect the antenna cables to the WWAN card.
4. Install the battery.
5. Install the base cover.
6. Install the Secure Digital (SD) card.
7. Follow the procedures in After Working Inside Your Computer.
46
To Next Page
Loading...
