Dell Vostro V130 - Installing The Wireless Local Area Network (WLAN) Card

Installing The Wireless Local Area Network (WLAN) Card
NOTE: To remove or locate the WLAN card, see Removing The Wireless Local Area Network (WLAN) Card.
1. Insert the WLAN card into its connector at a 45–degree angle.
2. Replace and tighten the screw that secures the WLAN card to the computer.
3. Connect the black and white antenna cables to their respective connectors marked on the WLAN card.
4. Install the battery.
5. Install the base cover.
6. Install the Secure Digital (SD) card.
7. Follow the procedures in After Working Inside Your Computer.
20