Speaker
Removing The Speaker
1. Follow the procedures in Before Working on Your Computer.
2. Remove the Secure Digital (SD) card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the display-closure sensor.
6. Remove the audio board and the hard drive.
7. Remove the cloth tapes that secures the speaker cable to the computer.
8. Disconnect the touchpad cable from its connector on the system board.
9. Remove the screws that secure the speaker to the computer.
10. Disconnect the speaker cable from the audio board and release it from its routing guides on the computer.
25
To Next Page
Loading...
