NOTE: To replace the SIM board, see Installing The Subscriber Identity Module (SIM) Board.
Installing The Subscriber Identity Module (SIM) Board
NOTE: To remove or locate the SIM board, see Removing The Subscriber Identity Module (SIM) Board.
1. Place the SIM board into its slot.
2. Tighten the screws to secure the SIM board to the computer.
3. Connect the SIM board cable to the system board.
4. Stick the flex cable on the metal bracket.
5. Install the battery.
6. Install the base cover.
7. Install the Secure Digital (SD) card.
8. Install the SIM card.
9. Follow the procedures in After Working Inside Your Computer.
60
To Next Page
Loading...
