Removing the microphone
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
NOTE: These steps are applicable for touch-screen models only. For
non-touch screen models, the microphone is integrated on the camera
assembly.
1 Remove the stand.
2 Follow the procedure from step 1 to step 2 in “Removing the optical
drive”.
3 Remove the back cover.
Procedure
1 Lift the microphone module off the display-assembly base.
43
To Next Page
Loading...
