Dell W15B - Replacing the Display Cable; Procedure; Post-Requisites

Replacing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Connect the display cable to the display assembly and close the latch to
secure the cable.
2 Adhere the tape that secures the display cable to the display assembly.
Post-requisites
1 Replace the system board.
2 Replace the heat sink.
3 Replace the system-board shield.
4 Replace the microphone.
5 Replace the control-buttons board.
6 Replace the wireless card.
7 Replace the memory module.
8 Replace the back cover.
9 Follow the procedure in step 4 in “Replacing the optical drive”.
10 Replace the stand.
71