Dell XPS 17 9730 - Audio-Daughter Board; Removing the Audio-Daughter Board

Steps
1. Align the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (1 > 2 > 3 > 4 > 5 > 6 > 7), as indicated by the numbers on the heat sink, install the seven screws
(M2.5x5) to secure the heat sink to the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Audio-daughter board
Removing the audio-daughter board
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following image indicates the location of the audio-daughter board and provides a visual representation of the removal
procedure.
Removing and installing components
27