Steps
1. Align the screw hole on the audio-daughter board with the screw hole on the palm-rest and keyboard assembly.
2. Replace the three screws (M2x4) that secure the audio-daughter board to the palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
Removing and installing components
29
To Next Page
Loading...
