Table 15. System setup options—Keyboard menu
Keyboard
Numlock Enable
Enable Numlock Enables or disables Numlock when the computer boots.
Default: ON
Fn Lock Options
Fn Lock Options Enables or disables the Fn lock option.
Default: ON
Lock Mode
Default: Lock Mode Secondary. Lock Mode Secondary = If this option is
selected, the F1-F12 keys scan the code for their secondary functions.
Keyboard Illumination
Keyboard Illumination Configures the operating mode of the keyboard illumination feature.
By default, Bright is selected.
Keyboard Backlight Timeout on AC
Keyboard Backlight Timeout on AC Configures the timeout value for the keyboard when an AC adapter is
connected to the computer. The keyboard backlight timeout value is only
effect when the backlight is enabled.
By default, 10 seconds is selected.
Keyboard Backlight Timeout on
Battery
Keyboard Backlight Timeout on Battery Configures the timeout value for the keyboard when the computer is running
on battery. The keyboard backlight timeout value is only effect when the
backlight is enabled.
By default, 10 seconds is selected.
Device Configuration Hotkey Access Allows user to select the preferred method to access device configuration
using hotkeys during system startup
By default, Enabled is selected.
Table 16. System setup options—Pre-Boot Behavior menu
Pre-Boot Behavior
Adapter Warnings
Enable Adapter Warnings Enables or disables the computer to display adapter warning messages when
adapters with too little power capacity are detected.
Default: ON
Warnings and Errors
Warnings and Errors Selects an action on encountering a warning or error during boot.
By default, Prompt on Warnings and Errors is selected.
NOTE: Errors deemed critical to the operation of the computer hardware
will always halt the computer.
Fastboot
Fastboot Configures the speed of the UEFI boot process.
By default, Thorough is selected.
Extend BIOS POST Time
Extend BIOS POST Time Configures the BIOS POST (Power-On Self-Test) load time.
System setup 57
To Next Page
Loading...
