Trigno™ Wireless Biofeedback System
- 18 -
Startup Scan Mode
Once the sensors turn on and complete the activation process, the LED will
alternate between amber and cyan, indicating that the sensor is looking for a
connection to the host. The host can either be a PC-connected base station or
a Bluetooth enabled Android device. Once a connection to a host is made, the
system will store this selection so that an immediate connection to this host is
made on future power cycles as soon as the host is available. Refer to
subsequent sections for information on how to pair a sensor to a Base Station
or to Bluetooth device.
To Next Page
Loading...
