DELTA DORE DRIVER 230 CPL - Time Setting; The Pilot Wire

The pilot wire principle enables the required operating mode
for the heating element to be selected from the programming
control unit.
The corresponding temperature is set directly by the heating
element thermostat (room by room control).
• Heating Programming
- 1 customizable program per day and per zone
- Automatic mode override:
It is possible to use a different operating mode (Comfort,
Economy, etc.) from the current one, until the next change
of program
- Absence: Constant or timed (from 1 to 99 days) to set
the installation to frost protection mode
• Transmission by power line carrier
- No damage to the existing installation
- Use with pilot wire receivers of the X2D PLC range
- Compatible with an energy manager
(e.g. GECPL1, GP4 CPL)
- Upgradeable system
• Tariff Management
- Linked with a CPL X2D energy manager (e.g. GECPL1
or GP4 CPL), it can reduce your energy consumption
according to the current tariff period
- Compatibility with all tariffs
• Radio Option
- DRIVER CPL is compatible with the TYDOM 520 radio
module that is used to associate domotics functions:
door/window magnetic contact, alarm control unit, etc.
- 5 -- 4 -
The Pilot Wire
Time SettingDescription
Press and release: slow forward.
Press and hold: fast forward.
Turn the
selector to
Each time you pass 0.00 you change the day
Command sent by
the control unit
Corresponding temperature
on the heating element
Comfort Comfort setting (thermostat knob)
Economy
Economy setting or -2°C or -3°C in relation
to the comfort setting (according to the model)
Frost Protection
Frost protection set to 7°C or 8°C
(depending on model)
or
Shutdown Heating shutdown