Operation with a Tydom 200
remote control
From the home domain :
You can shut down the installation by pressing
the tactile button .
This shutdown command is cancelled:
- either by pressing the button ,
- or by changing the position of the DRIVER CPL selector.
In the AUTO position of the DRIVER CPL only:
Pressing the tactile button or
once enables an override operation
The override is cancelled:
By zone:
- the next time the program switches over in the zone,
- by pressing the , or button of the DRIVER CPL.
On the 3 zones:
- by changing the position of the DRIVER CPL selector.
- by pressing the , or button of the TYDOM 200.
- 1 -- 1 -
Domotic functions
Operation with a TYDOM 300 telephone
transmitter
By calling the TYDOM 300 telephone transmitter, let the
synthetic voice guide you to determine or modify the status
of the heating system (see the TYDOM 300 transmitter
guide).
If a change is made via the TYDOM 300
telephone transmitter, the DRIVER CPL
displays the telephone symbol and the mode
controlled (e.g. comfort).
Change the position of the DRIVER CPL to return to normal
operation.
Operation with a TYXAL alarm
control unit
The DRIVER CPL receives and displays the “technical fault”
information of the TYXAL alarm control unit. If a fault occurs,
the display flashes alternately with the current program for 2
minutes and indicates:
1. Intruder or technical alarm
2. Tamper alarm
3. Battery
4. Supervision
5. Open entry
6. Mains fault in progress
7. Technical fault in progress
To Next Page
Loading...
