Delta-q IC650 Troubleshoot Manual

IC650 DC Wiring Instructions
39
7. Attach the positive and negative leads to
the positive and negative terminals using
the Torx T30 screwdriver and Torx T30/
M6 screws, with a recommended torque
of 4.5Nm +/-5%.
8. Replace the DC terminal block cover and
use the third, shorter T10 screw (supplied)
to secure the cover with a recommended
torque of 0.6Nm +/-6%.

Delta-q IC650 Specifications

General

Input Voltage	85-265 VAC
Input Frequency	45-65 Hz
Output Power	650 W
Efficiency	93%
Storage Temperature	-40°C to +85°C
Protection	Over-voltage, Over-temperature, Short-circuit
Communication	CAN bus
Cooling Method	Convection
Output Voltage	12-48 VDC