To Next PageTo Next Page
Need help?Do you have a question about the Delta 17-959L and is the answer not in the manual?
General| Brand | Delta |
|---|---|
| Model | 17-959L |
| Category | Power Tool |
| Language | English |
Defines safety symbols like DANGER, WARNING, CAUTION, and NOTICE used in the manual.
Provides fundamental safety precautions for operating machinery to prevent accidents.
Lists safety rules specific to the drill press operation and its components.
Warns about laser beam hazards, eye protection, and proper usage.
Advises against operating the drill press in explosive atmospheres due to potential sparks.
Details the motor's voltage and frequency requirements for proper operation.
Explains the importance and procedure for grounding the machine to prevent electric shock.
Covers conversion, wiring, and plug requirements for 240V operation.
Guides on selecting the correct gauge and type of extension cords for safe use.
Introduces the drill press model and highlights its key features and components.
Provides instructions for safely unpacking and performing initial cleaning of the drill press.
Lists the necessary tools, both supplied and not supplied, for assembly.
Gives an approximate duration for completing the drill press assembly process.
Details the steps for mounting the laser housing and the main drill press head onto the column.
Explains the procedure for correctly installing the drill chuck onto the spindle adapter.
Describes how to install the handles used for raising and lowering the spindle.
Guides on how to mount the bracket for securing the flexible work lamp's power cord.
Covers the basic on/off switches and initial setup adjustments for the drill press.
Explains how to operate and adjust the position of the flexible work lamp.
Details how to tilt the table forward/backward and left/right for angled drilling.
Describes the table's T-slots for attaching various accessories like stop blocks or clamps.
Covers the process of aligning the laser system for accurate drilling point indication.
Instructions for selecting spindle speeds by repositioning drive belts and adjusting tension.
Explains how to adjust the spring that automatically returns the spindle to its upper position.
Details how to move the spindle up and down using the handles and lock its position.
Guides on how to securely insert and safely remove drill bits from the chuck.
Lists factors determining the appropriate drilling speeds for different materials and bits.
Specific advice and techniques for drilling holes in wood materials.
Safety precautions and techniques for drilling holes in metal workpieces.
Instructions for regular cleaning of the drill press components using compressed air and cloths.
Common causes and initial checks for a machine that fails to power on.
Guidance on lubricating moving parts and protecting metal surfaces from rust.
Information on how to obtain genuine replacement parts for the drill press.
Details on how to access authorized service centers for repairs and warranty claims.
Outlines the terms, conditions, and duration of the new product warranty.
Notes specific warranty information applicable to products sold in Latin America.
