7
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from
all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gaso-
line or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor
paste wax.
CARTON CONTENTS
The 22-470 planer is shipped complete in one container mounted to a shipping skid. Remove the wooden crate from around the
machine. The planer is shipped with the motor, motor pulleys and belts assembled to the machine. Fig. 2, illustrates the loose items
supplied with the machine.
1. Cutterhead Guard
2. Dust Hood
3. M6 x 12mm Button-head Screws (14)
4. Flat Washers (14)
5. Knife setting gage
6. 10 x 14mm open end wrench
7. Handwheel handle
8. T-handle wrench
9. Allen wrench
Fig. 2
2
1
7
8
9
5
6
3
4
To Next Page
Loading...
Need help?
General
