15
WRENCH STORAGE
You can store your supplied wrench (A) Fig. 25 in the wrench storage hole (B), located on the left rear side of the machine.
Carrying handles (B) Fig. 26 are provided on both sides of the planer at the base and the top.
Fig. 25
Fig. 26
Fig. 27
You can use the stock transfer bar (A) Fig. 27 for transferring
stock (especially long workpieces) from the outfeed end to the
infeed end of the machine for additional cuts.
CARRYING HANDLES
A
B
B
B
A
STOCK TRANSFER BAR
TROUBLESHOOTING
For assistance with your machine, visit our website at www.deltamachinery
.com
for a list of service centers or call
the DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).
To Next Page
