To Next PageTo Next Page
Need help?Do you have a question about the Delta 43-431 and is the answer not in the manual?
Explains the meaning of DANGER, WARNING, and CAUTION symbols used in the manual.
Details health risks from dust and protective measures like ventilation and masks.
Covers reading the manual, proper attire, machine maintenance, and work area safety.
Outlines rules for using guards, tools, feeding work, and preventing accidents.
Provides rules for familiarization, wiring, clearing the table, and handling materials.
Details how to shape work, adjust fences, secure cutters, and use shaping methods.
Covers checking parts, locking switches, and referencing additional safety resources.
Covers circuit, fuse, extension cord use, and avoiding damp locations.
Specifies the machine's operating voltage and frequency.
Explains the importance and methods of proper machine grounding.
Provides guidance on choosing appropriate gauge and length for extension cords.
Describes the wood shaper's features, motor, and operating speeds.
Instructions for unpacking, removing protective coating, and cleaning.
Details all parts included in the machine's packaging with item numbers.
Guides for installing the handwheel and attaching extension wings.
Details on mounting the on/off switch assembly to the cabinet.
Step-by-step process for installing and replacing spindles.
Further instructions for attaching the on/off switch assembly.
Guides on setting table inserts flush with the shaper table.
Instructions for mounting cutters and collars onto the spindle.
Step-by-step guide for attaching the spindle guard.
Instructions on how to start, stop, and secure the machine.
Details on adjusting the spindle height using the handwheel and lock knob.
Procedures for changing motor pulley settings for different speeds.
Instructions on how to reverse the spindle rotation using the switch.
Explains safe and satisfactory methods for shaping with the fence.
Details safe and superior finishing methods using collars and a starting pin.
Explains the three possible positions for collars relative to the cutter.
Guidance on shaping workpieces that require support like miter gauges.
Techniques for shaping across grain and narrow materials safely.
Instructions for using the starting pin to support cuts and prevent kickback.
Steps for replacing the spindle cartridge, pulley alignment, and belt tension.
Information on obtaining accessories and a warning against using non-Delta parts.
Provides phone numbers for obtaining parts, service, or warranty assistance.
Details the terms and conditions of the limited product warranty.
Lists US service centers by state with contact information.
Lists Canadian service centers by province with contact information.
Lists registered trademarks associated with Porter-Cable and Delta.
Explains the meaning of DANGER, WARNING, and CAUTION symbols used in the manual.
Details health risks from dust and protective measures like ventilation and masks.
Covers reading the manual, proper attire, machine maintenance, and work area safety.
Outlines rules for using guards, tools, feeding work, and preventing accidents.
Provides rules for familiarization, wiring, clearing the table, and handling materials.
Details how to shape work, adjust fences, secure cutters, and use shaping methods.
Covers checking parts, locking switches, and referencing additional safety resources.
Covers circuit, fuse, extension cord use, and avoiding damp locations.
Specifies the machine's operating voltage and frequency.
Explains the importance and methods of proper machine grounding.
Provides guidance on choosing appropriate gauge and length for extension cords.
Describes the wood shaper's features, motor, and operating speeds.
Instructions for unpacking, removing protective coating, and cleaning.
Details all parts included in the machine's packaging with item numbers.
Guides for installing the handwheel and attaching extension wings.
Details on mounting the on/off switch assembly to the cabinet.
Step-by-step process for installing and replacing spindles.
Further instructions for attaching the on/off switch assembly.
Guides on setting table inserts flush with the shaper table.
Instructions for mounting cutters and collars onto the spindle.
Step-by-step guide for attaching the spindle guard.
Instructions on how to start, stop, and secure the machine.
Details on adjusting the spindle height using the handwheel and lock knob.
Procedures for changing motor pulley settings for different speeds.
Instructions on how to reverse the spindle rotation using the switch.
Explains safe and satisfactory methods for shaping with the fence.
Details safe and superior finishing methods using collars and a starting pin.
Explains the three possible positions for collars relative to the cutter.
Guidance on shaping workpieces that require support like miter gauges.
Techniques for shaping across grain and narrow materials safely.
Instructions for using the starting pin to support cuts and prevent kickback.
Steps for replacing the spindle cartridge, pulley alignment, and belt tension.
Information on obtaining accessories and a warning against using non-Delta parts.
Provides phone numbers for obtaining parts, service, or warranty assistance.
Details the terms and conditions of the limited product warranty.
Lists US service centers by state with contact information.
Lists Canadian service centers by province with contact information.
Lists registered trademarks associated with Porter-Cable and Delta.
General| Type | Miter Saw |
|---|---|
| Blade Diameter | 10 inches |
| Motor | 15 Amp |
| No-Load Speed | 5000 RPM |
| Bevel Angle Range | 45° Left |
| Dust Collection | Yes |
