What to do if Delta ASD-A2-3023 Servo Drives show Encoder temperature exceeds the protective range?
If your Delta Servo Drives are showing that the encoder temperature exceeds the protective range, above 105?, improve heat dissipation or reduce the loading of operation.
What to do if Delta Servo Drives show Communication of linear scale is breakdown?
If your Delta Servo Drives are showing that the communication of linear scale is breakdown, check the communication of linear scale again.
What to do if Delta ASD-A2-3023 show Analog input voltage error?
If your Delta Servo Drives are showing an analog input voltage error because the analog input voltage is higher than the value of P1-83, check all analog input voltages.
What to do if Delta ASD-A2-3023 show Warning of servo drive function overload?
If your Delta Servo Drives are showing a warning of servo drive function overload, set P2-66 Bit4 to 1 and then re-power on the servo drive.
What to do if Delta Servo Drives show Wrong setting of E-gear ratio?
If your Delta Servo Drives are showing the wrong setting of E-gear ratio because setting of E-gear ratio is wrong when power on the servo drive, modify the range of E-gear ratio and repower on the servo drive.
What to do if Delta Servo Drives show The absolute position is lost?
If your Delta Servo Drives are showing that the absolute position is lost because of battery undervoltage, after change the battery, conduct homing procedure again.
What to do if Delta ASD-A2-3023 Servo Drives show The multi-turn of absolute encoder overflows?
If your Delta Servo Drives are showing that the multi-turn of absolute encoder overflows because the operation distance exceeds the range the absolute encoder is able to record, conduct homing procedure again.
What to do if Delta Servo Drives show Encoder temperature warning?
If your Delta Servo Drives are showing an encoder temperature warning because encoder temperature exceeds the warning level (but it is still within the protective range85 ~100?), improve heat dissipation or reduce the loading of operation.
How to fix absolute data transmitted via I/O is in error in Delta ASD-A2-3023 Servo Drives?
If your Delta Servo Drives are showing that absolute data transmitted via I/O is in error because of sequence error, correct the reading sequence of I/O.
What to do if Delta ASD-A2-3023 Servo Drives show Wrong motor type?
If your Delta Servo Drives are showing the wrong motor type because incremental motor is not allowed to activate the absolute function, if the user desires to use absolute function, please choose absolute motor.
General| Control Modes | Position, Speed, Torque |
|---|---|
| Protection Class | IP20 |
| Series | A2 |
| Type | Servo Drive |
| Communication Interface | RS-485, CANopen |
| Protection Features | Overvoltage, Undervoltage, Overcurrent, Overtemperature, Short Circuit |
| Ambient Temperature | 0°C to 45°C |
| Storage Temperature | -20 ~ 65°C |
| Humidity | 20 ~ 90% RH, non-condensing |
Provides essential safety guidelines for handling and operating the servo drive.
Outlines routine maintenance and inspection procedures for the servo drive.
Crucial initial checks for product verification and damage assessment before installation.
Details on matching servo drives with their corresponding servo motors for system configuration.
Critical environmental requirements for the servo drive and motor during installation.
Detailed wiring instructions for 220V series servo drives and peripheral devices.
Detailed wiring instructions for 400V series servo drives and peripheral devices.
Step-by-step guide for setting parameters via the servo drive's panel.
Procedure for inspecting the servo motor and drive without load before operation.
Instructions for safely applying power to the servo drive and motor.
Comprehensive guide on tuning the servo system for optimal performance.
A comprehensive list of all servo drive parameters with their functions and related sections.
Configuration settings for RS-485 and RS-232 communication parameters.
Lists common alarms for the servo drive, their descriptions, and corresponding actions.
Detailed table of common causes and corrective actions for servo drive alarms.
Provides specific corrective actions for various alarm codes after they occur.
Technical specifications for the ASDA-A2 series servo drives.
Technical specifications for the ECMA series servo motors.
Instructions for installing absolute encoder systems, including connection examples.
Steps for initializing and operating absolute systems.
Checks to be performed before applying power to the servo drive.
To Next Page
