WARNING!
AVERTISSEMENT!
Ensure no live voltages are present on PV input and AC output
circuits, and verify that the DC disconnect, AC disconnect, and de-
dicated AC branch circuit breaker are in the “OFF” position, before
inverter installation.
DANGER!
DANGER!
CAUTION!
PRUDENCE!
INFORMATION!
INFORMATIONS!
WARNING!
AVERTISSEMENT!
PV solar arrays produce hazardous voltages and currents when
exposed to light which can create an electrical shock hazard.
Using dark opaque sheets cover the PV solar array before wiring
or connecting cable terminations
Before any electrical wiring can be connected to the inverter, the
inverter must be permanently mounted.
Use solid or stranded copper conductors only.
AWG14 for PV, AWG10 for AC, is recommended wire size.
.
Inverter warranty is VOID if the DC input voltage exceeds the inver-
ter 600 Vdc maximum.
To Next Page
Loading...
