CANopen Communication Module DVPCOPM-SL
(4)
Select “Network” => ”Online”, and the “Select Communication Channel” dialog box will appear. In this example,
if the connection with DVP-SV is in normal status, you will see the screen as below.
If there are more than one DVPCOPM-SL module (less than 8) connected to the left side of DVP-SV and
supposed there are two connected in this example, after clicking on “Online”, you will see the screen as below.
The DVPCOPM-SL which is closest to DVP-SV is regarded as the first module, and so on.
DVP-PLC Operation Manual
16
To Next Page
Loading...
