RMC70 Startup Guide
10 Delta Computer Systems, Inc.
Saving Settings
Throughout the startup procedure, make sure to save the
configuration changes you make or they may be lost!
1. Save RMCTools Project
On the File menu, click Save.
2. Update Flash
On the Controller menu, click Update Flash.
IF YOU DO NOT UPDATE FLASH, CHANGES TO THE
RMC WILL BE LOST WHEN POWER IS REMOVED!
3. Repeat Often
Make sure to save and update flash often to prevent loss of
data.
Tip: On the File menu, click Save and Update Flash to
perform both operations at once.
To Next Page
