Delta VFD007FP4EA-41 - Page 145

Chapter 10 Digital Keypad|CFP2000
10-13
29. Emergency Stop (EF) & Force to Stop
Selection (P07-20)
30. Filter Time of Torque Command
(P07-24)
31. Filter Time of Slip Compensation
(P07-25)
32. Slip Compensation Gain (P07-27)
4. FOCPG Mode
01: Password Decoder
Items
1. Parameter Protection Password Input
(P00-07)
2. Parameter Protection Password Setting
(P00-08)
3. Control Mode (P00-10)
4. Control of Speed Mode (P00-11)
5. Source of the Master Frequency
Command (AUTO) (P00-20)
6. Source of the Operation Command
(AUTO) (P00-21)
7. Stop Method (P00-22)
8. Max. Operation Frequency (P01-00)
9. Base Frequency of Motor 1 (P01-01)
10. Max. Output Voltage Setting of Motor 1
(P01-02)
11. Output Frequency Upper Limit (P01-10)
12. Output Frequency Lower Limit (P01-11)
13. Accel. Time 1 (P01-12)
14. Decel Time 1 (P01-13)
15. Full-load Current of Induction Motor 1
(P05-01)
16. Rated Power of Induction Motor 1
(P05-02)
17. Rated Speed of Induction Motor 1
(P05-03)
18. Pole Number of Induction Motor 1
(P05-04)
19. No-load Current of Induction Motor 1
(P05-05)
20. Over-voltage Stall Prevention (P06-01)
21. Over-current Stall Prevention during
Acceleration (P06-03)
22. Derating Protection (P06-55)
23. Software Brake Level (P07-00)
24. Emergency Stop (EF) & Force to Stop
Selection (P07-20)
25. Encoder Type Selection (P10-00)
26. Encoder Pulse (P10-01)
27. Encoder Input Type Setting (P10-02)
28. System Control (P11-00)
29. Per Unit of System Inertia (P11-01)
30. ASR1 Low-speed Bandwidth (P11-03)
31. ASR2 High-speed Bandwidth (P11-04)
32. Zero-speed Bandwidth (P11-05)