Chapter 10 Digital Keypad|CFP2000 Series
10-18
10. Language setup
Use Up/Down key to select
language, than press ENTER.
Language setting option is displayed in the language of the user’s choice.
Language setting options:
1. English
2. 繁體中文
3. 简体中文
4. Türkçe
5. Русский
6. Español
7. Português
8. Français
9. Polski
11. Startup-up
1. Default 1 DELTA LOGO
Industrial Automation
2. Default 2 DELTA Text
Industrial Automation
CSeries
3. User Defined: optional accessory is require (TPEditor & USB/RS-485
Communication Interface-IFD6530)
Install an editing accessory would allow users to design their own start-up
page. If editor accessory is not installed, “user defined” option will display a
blank page.
USB/RS-485 Communication Interface-IFD6530
Please refer to Chapter 07 Optional Accessories for more detail.
TPEditor
Go to Delta’s website to download TPEditor V1.60 or later versions.
http://www.deltaww.com/services/DownloadCenter2.aspx?secID=8&pid=2&tid=0&CID=06&itemID=060302&typeID=1&dow
nloadID=,&title=-- Select Product Series --&dataType=8;&check=1&hl=en-US
12. Main page
Default picture and editable
picture are available upon
selection.
Press ENTER key to select.
1. Default page
F
H
u
60.00Hz
540.0Vdc
0.00Hz
F 60.00Hz >>> H >>> A >>> U (circulate)
2. User Defined: optional accessory is require (TPEditor & USB/RS-485
Communication Interface-IFD6530)
Install an editing accessory would allow users to design their own start-up
To Next Page
Loading...
