Delta VFD007FP4EA-41 - Page 93

Chapter 7 Optional Accessories |CFP2000 Series
7-20
 Fan Removal
Frame A
Model『MKFP-AFKM』: Heat Sink Fan
Applicable model
VFD022FP4EA-52, VFD022FP4EA-52S, VFD037FP4EA-52, VFD037FP4EA-52S, VFD040FP4EA-52,
VFD040FP4EA-52S,VFD055FP4EA-52, VFD055FP4EA-52S, VFD075FP4EA-52, VFD075FP4EA-52S
1. Refer to Figure 1, loosen the 4 screws then remove the fan kit.
2. Screw torque: 14~16kg-cm [12.2~13.9lb-in.]
Figure 1
Frame A
Model 『MKFP-AFKB』:
Capacitor Fan
Applicable model
VFD007FP4EA-52, VFD007FP4EA-52S , VFD015FP4EA-52, VFD015FP4EA-52S, VFD022FP4EA-52,
VFD022FP4EA-52S, VFD037FP4EA-52, VFD037FP4EA-52S, VFD040FP4EA-52,
VFD040FP4EA-52S,VFD055FP4EA-52, VFD055FP4EA-52S, VFD075FP4EA-52, VFD075FP4EA-52S
1. Press the hook in the top of digital keypad, then rotate to remove the digital keypad (refer to Figure 2 )
2. Screw 1~4 torque: 14~16kg-cm [12.2~13.9lb-in.]
3. Loosen the screws 8~13 then remove the fan kit.(refer to Figure 3)
4. Screw 8~12 torque: 6~8kg-cm [5.2~6.9lb-in.]; Screw 13 torque: 12~14kg-cm [10.4~12.2lb-in.]