Delta VFD9A0MS43ANSHA User Manual

Chapter 8 Optional Cards MS300 (High Speed Model)
8-19
 LED Indicator & Troubleshooting
There are 2 LED indicators on
CMM-EIP01: POWER LED and LINK LED. POWER LED displays the
status of the working power, and LINK LED displays the connection status of the communication.
LED Indicators
LED Status Indication Processing Methods
POWER Green
On Power supply in normal status No action is required
Off No power supply
Check the power supply.
LINK Green
On
Network connection in normal
status
No action is required
Flashes Network in operation
No action is required
Off Network not connected
Check if the network cable is
connected.
Troubleshooting
Abnormality Cause Processing Methods
POWER LED off
AC motor drive not powered
Check if AC motor drive is powered, and if the
power supply is normal.
CMM-EIP01 not connected
to the AC motor drive
Make sure CMM-EIP01 is connected to the AC
motor drive.
LINK LED off
CMM-EIP01 not connected
to network
Make sure the network cable is correctly connected
to network.
Poor contact to RJ-45
connector
Make sure RJ-45 connector is connected to the
EtherNet port.
No option card found
CMM-EIP01 not connected
to the network
Make sure CMM-EIP01 is connected to the
network.
PC and CMM-EIP01 in
different networks and
blocked by network firewall
Search by IP or set up relevant settings via the AC
motor drive keypad.
Fail to open
CMC-EIP01 setup
page
CMM-EIP01 not connected
to the network
Make sure CMM-EIP01 is connected to the
network.
Incorrect communication
setting in DCISoft
Make sure the communication setting in DCISoft is
set to EtherNet.
PC and CMM-EIP01 in
different networks and
blocked by network firewall
Conduct the setup via the AC motor drive keypad.
Able to open
CMC-EIP01 setup
page but fail to utilize
webpage monitoring
Incorrect network setting in
CMM-EIP01
Check if the network setting for CMM-EIP01 is
correct. For the Intranet setting in your company,
please consult your IT staff. For the Internet setting
at home, please refer to the network setting
instruction provided by your supplier (ISP).
Fail to send e-mail
Incorrect network setting in
CMM-EIP01
Check if the network setting for CMM-EIP01 is
correct.
Incorrect mail server setting
Please confirm the IP address for the
SMTP-Server.

Delta VFD9A0MS43ANSHA Specifications

General

Brand	Delta
Model	VFD9A0MS43ANSHA
Category	Controller
Language	English