Delta VFD9A0MS43ANSHA User Manual

Chapter 9 Specification  MS300 (High Speed Model)
9-6
General Specifications
Control
Characteristics
Control Method V/F
Applied Motor IM (Induction Motor)
Max. Output
Frequency
0.0~1500.0 Hz
Overload
Capability
Heavy duty: 150% 60s, 200% 3s
Frequency
Setting Signal
0~+10V / -10V~+10V
4~20 mA / 0~+10V
1 channel pulse input (33kHz), 1 channel pulse output (33 KHz)
Main Function
Multi-motor switching (4 independent motor parameters), Fast Run, DEB
function, Momentary power loss ride thru, Speed search, Over-torque detection,
16-step speed (including main speed), Accel. / decel. time switch, S-curve
accel./ decal., 3-wire sequence, JOG frequency, Frequency upper/lower limit
settings, DC injection braking at start/stop, Built-in PLC (2000 steps)
Application
Macro
Built-in application parameter groups(selected by industry) and user-defined
application parameter groups.
Protection
Characteristics
Motor Protection Over-current, Over-voltage, Over-temperature, Phase loss
Stall Prevention
Stall prevention during acceleration, deceleration and running (independent
settings)
Accessory
Communication
Cards
DeviceNet, Ethernet/IP, Profibus DP, Modbus TCP, CANopen
External DC
Power Supply
EMM-BPS01 (DC 24V power supply card )
Certifications UL, CE, C-Tick, TÜV (SIL 2), RoHS, REACH
[Note 1] Control accuracy may vary depending on the environment, application conditions, different motors or encoder.
For details, please contact our company or your local distributor.

Delta VFD9A0MS43ANSHA Specifications

General

Brand	Delta
Model	VFD9A0MS43ANSHA
Category	Controller
Language	English